SPDIUV LT1 Electronic UV Lamp Tester

This unit is designed for testing of gas filled medium and low pressure lamps. The following lamps can be checked:

• Mercury low pressure lamps
• High power amalgam lamps
• Mercury medium pressure lamps
• High pressure sodium lamps
• Fluorescent lamps
• Neon lamps
• Metal halogenid lamps
• Low pressure sodium lamps

Touch the lamp contacts with the test probe and press the button. The gas inside the lamp will be ionized and a glow will be activated. In addition, the unit can be used for voltage tests and resistance tests. Please refer to the manual to avoid injuries or damage to the unit.

Art. No.: A002653 Lamp test: Default value with new battery: approx. 3 kV/160 Hz Field intensity - 150-170 kHz: approx. 100 uV/m Monitor for lamp active test: Red LED and signal of approx. 2 kHz

General technical data: Temperature range: -10°C to +50°C, max 70% rel. Humidity Main supply: 9 V battery, IEC 6LR61 Size (H x W x D): 235 x 80 x 45 mm Net weight: approx. 450 g

Please note that some types of so-called quick start lamps cannot be tested.