The UV Self-Leveling Filler for Stone and Concrete provides an even and smooth surface for the best UV TopCoat application.
This UV Self-Leveling Filler is a Urethane-Acrylate substance specifically designed to work on Stone and Concrete, providing an even and smooth surface for the best possible UV TopCoat application and look.
The self-leveling nature of this product makes it easier to apply and achieve the desired results. It is fast curing and buildable.
The UV Self-Leveling Filler for Stone and Concrete should be applied to a wet thickness of 1.0 to 1.25 mil (25 to 30 microns) for best performance, and cured immediately after application.
This product can be applied with spray, brush, squeegee, or roll methods.
The filler should be fully cured using a high intensity UV "H" lamp delivering a dose of 950 to 1100 mJ/cm2.
Note: If multiple layers are needed to fill deep holes or depressions, it is recommended to cure each layer with a gallium doped lamp to permit a slightly 'undercured' surface between layers.
The fully cured layer should then be sanded using 180-220 grit prior to the application of a TopCoat.
Designed to work with:
- Fast Curing
- UV Cure - Low VOC's (Green-Friendly Technology)
- Superior scratch resistance
Technical Data Sheet:
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.