M&R Part # 1036088A UV Curing Lamp Bulb

Guaranteed 100% Compatible Replacement Ultraviolet (UV) Lamp - 60 inch arc length

The M&R Part # 1036088A UV Curing Lamp Bulb is a 100% compatible replacement lamp bulb that exceeds OEM standards of UV curing bulb performance. The CureUV lamp bulb is 100% compatible to the M&R UV systems and works well for the following part numbers:

• 1036088A
• Vitran
• 7560A4C-1

The 60 inch lamp bulb is manufactured in the USA and is a quality solution that has a predictable lifespan. The replacement lamp allows you help in drying coatings of inks in graphics and signs. CureUV provides UV lamp for printers in different arc length and spectral fills. The lamp consists of a quartz plate that works as filler between lamp and the system. This plate prevents dirt, grit and contaminants from building up on the lamp.

Studies have shown that the UV lamp has to be periodically replaced as the bulb hour rises. The rise in the bulb hour causes the lamp to produce less UV light and more heat. With greater heat there are chances of print media bulges and this also causes damage to the shutters and reflectors in the lamp housing. This leads to a bad output and also high repairing costs. Therefore it is recommended to use a good quality UV lamp like this one from CureUV. 

Note: CureUV.com stocks generic products that are 100% compatible with the original equipment.