18" 15W UVC Slim Fixture for Sterilization

The 18" Mountable UVC System 120V is a modular ultraviolet system designed for installation in HVAC systems to provide UVC energy for coil and drain pan surface treatment and improved air quality.

The system integrates the UVC lamp, fixture housing, power source, and lamp sockets into a single factory-assembled and tested unit. Its modular design allows for flexible installation in both built-up and side-access configurations.

The housing is constructed from Type 304 stainless steel and includes male and female power plugs to facilitate fixture-to-fixture connection. The 120V power source uses an electronic, high-frequency rapid-start design with overload protection and RF/EMI suppression.

The UVC lamp is a high-output, hot-cathode T8 lamp with a medium bi-pin base that produces UVGI at 254 nm. The fixture is designed for reliable operation in typical HVAC environments and incorporates safety features to help prevent operation when the fixture is not properly installed.

Key Features

• Compact 18" modular design for flexible HVAC installation
• Suitable for built-up and side-access configurations
• Type 304 stainless steel housing
• Factory-assembled and tested UVC lamp and fixture
• 120Vac, 50–60 Hz electrical configuration
• 0.5A electrical current
• High-output UVC lamp producing UVGI at 254 nm
• Electronic high-frequency rapid-start power source with overload protection
• RF and EMI suppression
• Medium bi-pin, single-click safety, twist-lock lamp sockets
• UVC-resistant polycarbonate sockets
• Male and female power plugs for fixture-to-fixture coupling
• Fixtures can be connected end-to-end for different system configurations
• Integrated safety switch
• Designed for installation in HVAC systems
• UL/C-UL Listed under Category Code ABQK (Accessories, Air Duct Mounted)
• UL Standards 153, 1598, and 1995
• One-year warranty on the fixture and lamp

Applications

The system is designed for HVAC applications where UVC energy is used to treat surfaces within air-handling equipment. It can be used to help control surface microbes that grow on coils and drain pans, including mold and bacteria.

The compact 18" modular design is particularly suitable for smaller HVAC sections, limited installation spaces, or systems where multiple fixtures are connected together to achieve the required coverage.

The modular design allows the fixtures to be installed in either built-up or side-access arrangements and configured for HVAC systems of different sizes.

Technical Specifications

Construction & Design

The UVC lamp and fixture are factory-assembled and tested. The assembly consists of the housing, power source, lamp sockets, and UVC lamp, with components constructed to withstand typical HVAC environments.

The stainless steel housing incorporates male and female power plugs at opposite ends, allowing fixtures to be connected together for flexible configurations. Each fixture integrates its components into one assembly to maximize serviceability.

Safety

Each fixture incorporates a safety switch designed to disable operation when the fixture is not properly installed. An access/viewport door is also available with an eye-protection viewing porthole.

UV exposure can be hazardous to people and should be controlled through appropriate installation and safety procedures.

Installation

The system is designed for installation within HVAC systems and can be configured for either built-up or side-access applications. Fixtures can be connected end-to-end to accommodate different system requirements.

Professional installation is recommended to ensure proper positioning, electrical connection, access, and UV safety.