Système UVC montable de 48 pouces, 120 V

The 48" Mountable UVC System 120V is a modular ultraviolet system designed for installation in HVAC systems to provide UVC energy for coil and drain pan surface treatment and improved air quality.

The system integrates the UVC lamp, fixture housing, power source, and lamp sockets into a single assembly. Its extended 48" configuration is designed to provide increased coverage for larger HVAC coils and air-handling sections while retaining the modular installation concept used throughout the system.

The housing is constructed from Type 304 stainless steel and includes male and female power plugs to facilitate fixture-to-fixture connection. The 120V power source uses an electronic, high-frequency rapid-start design with overload protection and RF/EMI suppression.

The UVC lamp is a high-output, hot-cathode T8 lamp with a medium bi-pin base that produces UVGI at 254 nm. The fixture is designed for reliable operation in typical HVAC environments and incorporates safety features to help prevent operation when the fixture is not properly installed.

Key Features

• Extended 48" modular design for larger HVAC applications
• Increased coverage for larger cooling coils and air-handling sections
• Suitable for built-up and side-access configurations
• Type 304 stainless steel housing
• Integrated UVC lamp, fixture housing, power source, and lamp sockets
• 120Vac, 50–60 Hz electrical configuration
• Approximately 1.1A electrical current
• High-output UVC lamp producing UVGI at 254 nm
• Electronic high-frequency rapid-start power source with overload protection
• RF and EMI suppression
• Medium bi-pin, single-click safety, twist-lock lamp sockets
• UVC-resistant polycarbonate sockets
• Male and female power plugs for fixture-to-fixture coupling
• Fixtures can be connected end-to-end for different system configurations
• Integrated safety switch
• Designed for installation in HVAC systems

Applications

The system is designed for HVAC applications where UVC energy is used to treat surfaces within air-handling equipment. It can be used to help control surface microbes that grow on coils and drain pans, including mold and bacteria.

The extended 48" configuration is designed for applications requiring broader coverage across larger cooling coils, drain pans, or air-handling sections. Its longer lamp and fixture length can reduce the number of individual fixtures required across wider treatment areas.

The modular design allows the fixture to be incorporated into either built-up or side-access arrangements and combined with additional compatible fixtures when greater coverage is required.

Technical Specifications

Construction & Design

The assembly consists of the housing, power source, lamp sockets, and UVC lamp, with components designed for use in typical HVAC environments.

The stainless steel housing incorporates male and female power plugs at opposite ends, allowing compatible fixtures to be connected together for flexible configurations. The extended 48" design provides additional treatment coverage while retaining the same modular construction concept as the shorter system sizes.

Safety

The fixture incorporates a safety switch designed to disable operation when the fixture is not properly installed. An access/viewport door can also be used with an eye-protection viewing porthole where applicable.

UV exposure can be hazardous to people and should be controlled through appropriate installation and safety procedures.

Installation

The system is designed for installation within HVAC systems and can be configured for either built-up or side-access applications. Fixtures can be connected end-to-end to accommodate larger or more complex system requirements.

Professional installation is recommended to ensure proper positioning, electrical connection, access, and UV safety.