Portable Handheld 200W UV LED Curing Light – 365nm / 395nm

The Portable Handheld UV Curing Light is a high-power UV LED curing system designed for applications requiring localized, portable UV exposure. It combines a 200W LED light source with 365nm and 395nm UV wavelengths, providing a practical solution for curing UV-sensitive coatings, inks, paints, and other UV-curable materials.

Its handheld design allows the UV light source to be positioned directly over the material being cured, while the manual control and dimming capability provide flexibility during operation. The unit operates from AC 85–265V, making it suitable for a wide range of electrical environments.

Technical Specifications

UV Wavelengths

365nm UV LED

The 365nm wavelength is within the UVA range and is commonly used for UV curing applications requiring shorter-wave UVA radiation.

395nm UV LED

The 395nm wavelength provides longer-wave UVA output and can be used with UV-curable materials formulated for near-400nm LED curing systems.

200W High-Power UV LED Source

The unit features a 200W LED power rating, providing a high-output UV source for localized curing applications. The handheld configuration allows the UV source to be positioned close to the target surface for spot curing, repairs, prototypes, and other applications where a fixed curing chamber or conveyor system is not required.

Portable Handheld Design

With dimensions of 10.43 × 2.95 × 5.91 inches (265 × 75 × 150 mm) and a weight of 4.41 lb. (2 kg), the unit is designed for handheld operation and localized UV curing.

The manual button provides direct operation, while the dimming function allows the output to be adjusted according to application requirements.

Applications

The Portable Handheld UV Curing Light is intended for applications involving UV-sensitive materials, including:

• UV ink curing
• UV coating curing
• UV paint curing
• Localized and spot curing
• UV-sensitive adhesive curing
• Prototype and laboratory applications
• Industrial UV curing processes

Operating Requirements

The curing light operates from AC 85–265V, with a nominal voltage specification of 220V. It is powered directly from an AC source and uses an LED light source with a stated service life of up to 50,000 hours.

Actual curing performance depends on the material formulation, UV initiator system, exposure distance, exposure time, UV intensity at the target surface, and the spectral sensitivity of the material. The stated 200W rating represents electrical power and should not be interpreted as UV irradiance at the target surface.