Loctite UVALOC 1000 UV Cure Chamber - Part Number 805741
|
SKU: |
|
-
Technical Data:
Input Voltage: 240 VAC; 50-60 Hz
Pneumatic supply required: 60-90 psi
Pneumatic supply tubing: 6mm
Power Consumption: 1200 watts
Dimensions: WxHxD
Exterior of unit: 12" x 29 1/4" x 17"
Cure Chamber: 9" x 12" x 13 3/4"
Cure area: 6.3 inches wide by 6.3 inches deep
Weight: 57 lbs.
The Loctite UVALOC 1000 UV Cure Chamber, part number 805741, is a high-performance modular curing system consisting of a cure chamber, lamp housing and controller. The key feature of this unit is the lamp intensity is continually monitored and a low-level output condition can be established to ensure optimal curing performance.
The chamber has four rack levels to accommodate a slide-in tray that allows for easy positioning of parts of various heights at the level of optimum exposure. A perforated aluminum plate allows positioning of customized part holders.
The lamp is shielded by a timed control shutter that eliminates UV exposure to operators during loading or unloading of parts. A door safety switch prevents opening while exposure is in progress. The cure time is controlled by the built-in timer and can be operated in a continuous or timed mode. The exposure cycle is triggered by footswitch, panel-mount start button or PLC interface.
Chamber Features:
-Typical UV irradiance is up to 110 mW/cm2 depending upon selection of 4-position rack height.
-Dual power setting of 500 or 1000 watts permits curing of temperature-sensitive parts without damage by heat.
-Digital timer allows for setting exposure time from 3 seconds to 15 minutes in one-second increments.
-Pneumatically operated shutter prevents exposure of UV to operators.
-Safety door interlock switch prevents opening of the door while the shutter is open.
-Built-in over-temp protection in the controls automatically shuts the lamp off on a high temp condition.
-Effective cure area of 6.3 inches wide by 6.3 inches deep (160 mm x 160 mm).
-Parabolic shaped reflector generates a uniformly illuminated radiation area.
-Standard lamp included is mercury vapor lamp; 365 nm wavelength.
-1,000 hours of expected UV bulb life with proper handling and maintenance.
Chamber Includes:
-Controller
-Lamp housing
-Curing cabinet
-UV bulb (pure mercury vapour)
-UV intensity sensor and built-in digital intensity display
-Lamp housing connector cord
-AC Power cord (pig-tale wire ends)
-Footswitch
-Operating Manual
RoHS Compliance Status: Not Determined
Resources:
Loctite UVALOC 1000 UV Cure Chamber - Product Description Sheet (PDF)
Loctite UVALOC 1000 UV Cure Chamber - Equipment Operation Manual (PDF)
-
UVALOC 1000
805741
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Loctite® provides the most diverse UV, LED and Visible Light curing equipment on the market today.
Whether your adhesive curing application calls for an ultraviolet spot cure unit, enclosed chamber, flood curing unit, or conveyor system, you can count on the Loctite® brand name for high quality and long term reliability. Loctite® has cost-effective Radiometers and Dosimeters to ensure your UV-curing process remains in control. Loctite® curing equipment is the perfect solution for UV and Visible Light curable coatings and adhesives. Loctite® also offers UV adhesives and epoxies for a wide range of usage, including: metal, plastic, polycarbonates, PVC, and medical applications.