The Total-Cure 1100S handheld UV curing system is without a doubt the most powerful and versatile UV curing system in its class.

This portable and rugged UV system has a maximum output of over 1100 watts. Its curing width of 3" and uniform ultraviolet exposure make working on wood, glue, epoxies, and other coatings a joy.

Designed to be user-friendly, the Total-Cure1100S works perfectly on any UV curing application (see the typical applications below). It even switches to low power when placed in its standby nest to lower your power consumption. Unlike our more powerful UV systems, the 1100S is the most powerful system that will plug right into a standard 120-volt wall outlet so no need to call an electrician to set up your workplace! It provides enough UV light to handle most applications but when curing coatings on curved surfaces or demanding applications, it is less than ideally suited. For serious production environments, we recommend going with the full 2400 watts.

The compact package allows the system to be permanently mounted in a fixed location for the sake of automation or to be used as a portable system and transported for on-site UV applications. The system is designed with safety and heat in mind so unlike systems of similar power, the thermal controls prevent the handheld irradiator from warping wood, veneer, or other sensitive substrates while still maximizing the amount of ultraviolet exposure.

Features:

1100 Watts of Power: With over twice the power of other systems in its class, the Total-Cure 1100S is able to cure coatings that other systems would leave tacky and wet.
Output Wavelength Versatility: The 1100s system allows you to run bulbs of 5 types (Mercury, Iron-doped, Lead-doped, Galium-doped, and Indium-doped) to ensure you get the correct wavelength to match your coating.
Smart Nest: Whenever you are not using the convenient handheld wand, simply place it in the nest and it automatically goes into standby mode. This not only lowers your power consumption but elongates bulb life and reduces any safety concerns.
Thermal Control: The built-in thermal controls keep the unit at an optimal temperature at all times to 1) optimize UV curing energy, 2) maximize bulb life, 3) prevent excess heat from warping your finished surfaces, and 4) prevent unnecessary heat from reaching the operator.
Uniform power delivery: All Total-Cure systems are thoroughly tested for uniform power delivery. A tool is only as good as its weakest link so be on the lookout for systems with powerful ballasts that have uneven output because they will only cure as well or as the least powerful part of the UV bulb.
Standard Wall Outlet Convenience: Unlike more powerful systems that require a special 220V connection, this system plugs right into a standard wall outlet in the US which allows for a convenient setup but also gives you the power to take it on-site and get the job done without needing to bring in an electrician.
Made in the USA : Unlike our competitors, we still do all of our design, engineering, and manufacturing right in our Delray Beach, FL headquarters.
Industry Leading Warranty: Our US production allows us to ensure that our UV systems meet the highest quality standards and that is why we can so easily offer a 1-year warranty right out of the box. Whether you purchased our system 1, 5, or even 10 years ago. We stand by our systems.

Wavelength

Depending on your application, you may need lights of different wavelengths to initiate the UV photoreactors. For this reason, we offer doped lamps with a number of elements. If the technical data sheet of the ink, glue, or coatings you are using do not specify a wavelength, it is likely that you need the standard mercury lamp.
However, we would love to help figure out exactly which bulb is right for your application.


Mercury	Iron	Gallium	Indium
365nm	390nm	420nm	440nm

Typical Applications:

UV Adhesives
UV Finishes
UV Clear Coats
UV Paint
UV Ink
UV Varnish
Creating Photo-Initiated Reactions for Lab Use

What's in the Box:

UV irradiator.
Power supply
Stand-by smart nest
UV Safety gear

Specifications:

Available Bulbs: Mercury (Hg), Iron (Fe), Gallium (Ga), Indium (In), Lead (Pb)
UVA Intensity: at 1 inch from Light - 885 mw/cm²
UVA Intensity: at 3 inches from Light - 578 mw/cm²

Power Supply:

Weight: - 34lbs
Dimensions - Width 12.14" x Depth 8.00" x Height 6.58"
Box Dimensions: 30" x 16" x 10"
Power Requirements - 110V 60Hz with 15A service (220V 50Hz Available for international purchases.)
Cooling: Integrated cooling and fans.
Power Cord: 6' (foot) power cord
Irradiator Cord: 20' (foot) irradiator cord
Handles: Molded plastic handle for portability
Mounting Base: 6 non-marking, non-skid feet

Irradiator:

Weight - 4lb
Dimensions - Length 9.33" x Width 4.14" x Height 6.35"
Ergonomic extruded aluminum handle
Dual cooling fans
Easy change UV lamp and Reflector
Hi/Low selectable power
Standby power safety switch (activated when placed in nest)

Stand-by Nest:

Weight - 6lbs
Dimensions - Length 12.95" x Width x 6.50" x Height 4.65"
Power Requirements - 110V 60Hz (220V 50Hz Avail.)
Integrated cooling fan
4 non-marking, non-skid feet

Technical Data Sheet:

System Manual:

1-Year Warranty:

UV Finish Application Guidelines:

Mechanical Drawings:

Videos:

If you have any questions or are just unsure about anything give us a call at (561) 243-8442 or email us at sales@cureuv.com and we will gladly help you out.

UV Curing Systems for Adhesives and Signs

Ultraviolet Glue Curing Lamp for Phone & Computer Repair

UV-A Flood Curing Lamp - 250 Watts

Handheld UV Curing Spotlight with UV-A Lamp

LED 4 Module Curing Lamp - For Adhesives and Hobbyists

UV Technique Visualizer Training Kit

CureUV Total-Cure 1100S UV Curing System