UV Cure Premium Clear Wet-Look Finish Topcoat
UV Cure Premium Clear Wet-Look Finish Topcoat
SKU:500005
Couldn't load pickup availability
The CureUV Premium Clear Wet-Look Finish Topcoat provides a clear wet-looking protective coat that adds depth and brings out the beauty that lies beneath.
This glossy layer does much more than just protect your works, thanks to its composition, the Premium Clear Wet-Looking Topcoat also provides superior bonding strength for other UV Coatings, such as our:
This product requires curing with a medium pressure mercury UV System producing at least 500 mW/cm2 of intensity. We recommend utilizing our Total-Cure1100s or the Total-Cure 2400 or a medium pressure mercury UV Curing Conveyor for optimal results.
Features:
- Add depth and a smooth clear coat
- Thin finish thickness
- Superior scratch resistance
- 100% Solids - NO VOC's (Green-Friendly Technology)
- Always in stock and 24/7 ordering availability
- Available in 1, 5, and 55 Gallons
Technical Data Sheet:
Safety Data Sheet:
Coverage: If applied by instructions, each gallon of wet-look covers 700-800 square feet at 1 mil. We recommend you use between 1 and 2 mil but naturally, the heavier you utilize the wet-look, the lower the coverage footage.
UV Cure Coatings Description Sheet (PDF)
UV Cure Premium Clear Wet-Look Finish Topcoat MSDS (PDF)
UV Finish Application Guidelines (PDF)
Coatings are non-returnable and non-refundable
Also Known As:
Also Known As:
Share
I run a small Custom Shop making primarily ukes but some other things as well. I started with nitro and water based poly, but the wait times were killing me. This product lays down smooth and is very tough. Use the grain filler and then a few coats of this and the finish is perfect. Once you get the technique down the process is pretty easy, and the coating dries in less than a minute under the UV light. With all of the sanding/prepping and buffing involved, I can start and finish and entire instrument ready to ship in just a few days instead of a few weeks, and its much more resilient than other products I've used. The customer service has always been almost instant, can't recommend enough.
I swore by nitro but the premium wet look finish is a perfect finish for our little guitar shop, easy to apply and easy to sand and buff. It truly gives us that wet-look we were looking for without changing the tone of the guitar at all and the finish quality is very tough to scratch.
(Review migrated from previous site version)